Skip to content
ProjectControls.com
Planning, Scheduling & Programming Discussion

Hi Everyone

In the Open Standard
Ken NemsMember for 12 years 7 months
Created
2
3
0

Hi Everyone,

I am new planner who's being asigned to build a draft programme for Earthworks. Please can any one help me out with a basic activities that is required for an earthworks programme in rail or kindly advice me on how to go about it.

Many thanks.

Ken.

Save Follow Follow forum Report
Reply New topic

2 replies

Oldest first
  1. 0
    Mike Testro ·
    #1

    Hi KenIt is not simple.An

    Hi Ken

    It is not simple.

    An earthworks programme for a linear project such as a rail track starts with the engineer's schedule of Cut to Fill.

    This is a matrix in the contract documents that sets down:

    1. Location and volumes of excavation zones.

    2. Classification of the soil - there are usually 5 types - three of which will be acceptable for fill material.

    3. These are Granular - Cohesive - Chalk each of which needs different handling techniques.

    4. Location and volume of the fill zones.

    From this information you can calculate the number of haul units which is the key factor in the duration of the project and the duration of each cut to fill operation.

    The best software to use is a time / distance format such as Tilos or Asta PowerProject in task per line mode.

    Having established all that you need a task for:

    1. Each cut to fill zone

    2. Drainage

    3. Track bed

    Best regards

    Mike Testro

    Report
  2. 0
    Ken Nems ·
    #2

    Hi Mike,Many thanks for this

    Hi Mike,

    Many thanks for this information, I think I might just ask the PM for the contract documents that might give me a head way on what is required.

     

    Ones again many thanks for the help.

    Regards,

    Ken

    Report

Log in or join to reply

ProjectControls.com is free to join. Members can post questions, reply, vote and follow discussions.

Log inJoin free

Existing members: your original username and password still work. Forgot password?