Skip to content
ProjectControls.com
Planning, Scheduling & Programming Discussion

Project Controls Procedure

In the Open Standard
Randa ShammasMember for 22 years 1 month
Created
6
4
0
Hello All!

My name is Randa, and I am a project controls engineer(sounds like the intro to an AA meeting, except that I am not an alcoholic. no offense to all out there). I work in an EPC company for Oil & Gas.

My company recently began restructuring our project controls department to refresh and update our responsibilities as project controllers. Our procedures are being revised and updated, and I have been placed in charge to write the "New ’n Improved" Project Controls Procedure. I have many refernce procedures but the only drawback is that they are projecy-specific, and I am looking for something more general and global for Oil & Gas EPC projects. if any of you planners out there have such a document, I would highly appreciate a copy of it for reference in building our procedures. If not, then your mere suggestions / input / guideline on how to build such a procedure will be of excellent help to me and highly appreciated.

I will be writting you guys for your advice as i guild this procedure, and I look forward to your contributions!

Cheers,

Randa
Save Follow Follow forum Report
Reply New topic

6 replies

Oldest first
  1. 0
    Ronald Winter ·
    #1
    Randa,

    Your first stop (after here) should be to the Association for the Advancement of Cost Engineering (http://www.aacei.org. They are the specialists in Project Controls. You can find Recommended Practices CDs and books and a lot of members who are very knowledgeable in Project Controls.

    Good luck!

    Ron Winter.
    Report
  2. 0
    Joe Mansour ·
    #2
    Randa,
    This document http://www.apm.org.uk/resources/PC%20REVISED%20STANDARDS%20V2% might be useful for you.

    Joe
    Report
  3. 0
    Ronald Winter ·
    #3
    Joe,

    I tried that link and the page referenced cound not be found.
    Report
  4. 0
    Dayanidhi Dhandapany ·
    #4
    Hi Joe,

    Refer the "Format my post" section to set up your link properly about the project controls procedure, or else we can’t access the link that you have given.

    Cheers!!

    Daya
    Report
  5. 0
    Joe Mansour ·
    #5
    Try now,
    National Occupational Standards for Project Controls,
    or go to the
    site
    Joe
    Report
  6. 0
    Joe Mansour ·
    #6
    It still can’t work.
    Simply go to http://www.apm.org.uk/resources/occstandards.htm
    and download the national occupational standards for project controls.
    This should work.
    Joe
    Report

Log in or join to reply

ProjectControls.com is free to join. Members can post questions, reply, vote and follow discussions.

Log inJoin free

Existing members: your original username and password still work. Forgot password?