Skip to content

Oil and Gas Project - WBS Sample, Production rates?

Edwin ReyesMember for 19 years 11 months
Created
83
12
0

I came from High rise building construction and shifting to Oil and Gas Project. Can u give me a basic idea on its WBS and production rates. also an idea on its EPC schedule format. Your share of knowledge would be very much appreciated... thanks..

Anyone who knows where I can find a copy of the CSI coding (production rates)... tnx

83 replies

Oldest first
  1. 0
    Edwin Reyes ·
    additional...

    what website deals with planning and scheduling of an Oil and Gas project.. Please help me tnx..
  2. 0
    Edwin Reyes ·
    if you have sample proj of an Oil & gas, and willing to share your knowledge & experience... email me at benrey@pldtdsl.net

    everything will be very much appreciated... tnx
  3. 0
    Tahir Naseem PMP, CCE ·
    Dear
    I am working as senior planner in CPECC(china petroleum engineering & construction corporatioon) and have almost 12 year of proven experience in this field. Here is two general sample for the construction of petrochemical WBS
    based on the herirachy of the project
    Based on Area/discipline
    Level I Project
    Level II Project Phase such as Management phase/mobilization/engineeering/procurement/construction/commissionong and finally and project hand over.
    Level III Unit / Aarea such as condensate/naptha/utility and etc
    Lavel IV sub area such as compressor unit/pump house and etc
    and then developing of detail activities for each discipline.
    for 2nd i wiil inform you later and i have lot of sample project you can contact me at tahirnaseem1973@yahoo.com for further correspondence.
  4. 0
    Edwin Reyes ·
    thank u for ur time to write... i really appreciate support like this... I wish u can send me a sample petrochem (oil & gas) project in P3... I really need this one. tnx again
  5. 0
    Tahir Naseem PMP, CCE ·
    Dear Edwin
    I hope you received the sample project. If you need some more information or help, dont hesitate to contact.
    Tahir
  6. 0
    Edwin Reyes ·
    hi tahir,

    thank you for your share of knowledge and experience, i deeply appreciated things like these.

    I cant open the pdf file im not sure if this is an adobe update problem....

  7. 0
    Marcio Sampaio ·
    I’m going to send u some material.


    Regards.
  8. 0
    Jerome Labio ·
    I am new in oil in gas industry as a Planner employee, Anyone who can give me sample of Planning and scheduling of oil and gas Job. Please email me at jerome_labio@yahoo.com
    You share of knowledge will be very much appreciated.
  9. 0
    Frans Lasut ·
    Hi marcio,

    can I get one too?

    My email address: tamaneden@gmail.com
  10. 0
    Shelby Solski ·
    Would you mind sending me a copy of this information. :)


    solskish@alyeska-pipeline.com


    THANK YOU
  11. 0
    Bishwa Sharma ·
    Hi Tahir/Marcio:

    Can I join the line, too? I´d also love to have a copy of your samples. I mostly worked in the oil and power sectors but not much on the pipeline construction part so a sample on pipeline construction programming will be specially welcome. If you have something on facilities construction that will also be appreciated.
  12. 0
    Ankur Patel ·
    Please share these schedule file or document with me.

    Appericiate your help.

    My id: ankur8685@yahoo.co.in, ankur8685@hotmail.com


  13. 0
    Kesa Khanthapraisi ·
    I need too
    kesa_kh@yahoo.com
  14. 0
    Dayanidhi Dhandapany ·
    I would like to have WBS, productivity rates for Oil and Gas Project. so you can send me the info to plannerdaya@yahoo.com
  15. 0
    Frans Lasut ·
    Tahir/Marcio, probably, we can make one knowledge base of oil & gas programme (like fragnet in P3) covering: EPC and O&M, offshore and onshore, well and non-well, etc.

    I haven’t seen a comprehensive book of planning & scheduling in Oil & gas project.

    Please share your knowledge


    Regards

    Frans
    tamaneden@gmail.com
  16. 0
    Sumin Sumughan ·
    Tahir/Marcio,

    If you don’t mind ,Can you send Oil & gas sample programm to suminms@gmail.com .

    Thank you in advance.

    Regards,
    Sumin
  17. 0
    Rey Josef Sebastian ·
    I need too. Thanks!

    basti_67@yahoo.com
  18. 0
    Charleston-Joseph Orbe ·
    Tahir / Marcio

    I’m also interested.

    Please sent to charlieorbe@yahoo.com

    Cheers,

    Charlie
  19. 0
    Chachrist Srisuwanrat ·
    I want to see it too.
    christ_cv@hotmail.com
  20. 0
    Karim Mounir ·
    Tahir / Marcio,

    I’ll be glad if u send me this at:
    karim.mounir@gmail.com

    Thanks in advance.
  21. 0
    Mimoune Djouallah ·
    Tahir/Marcio

    me too if you don’t mind
    djouallah.mimoune@gmail.com

    thanks.
  22. 0
    Anshad NK ·
    May i also have a copy of the same?
    at anshadnk@gmail.com
  23. 0
    Brij Patwari ·
    Hi Ppl...
    Can any send me the Schedule & BACKUP of duration calculations & resource consideration pls??
    my email id : brij_cept@yahoo.co.in

    Regards...
  24. 0
    Eleazar dela Cruz ·
    Hello Tahir/Marcio
    Could you please provide me a copy too.

    thank you .

    zhardelacruz@yahoo.com.sg
  25. 0
    Ife Olyke ·
    Please send me a copy too..

    olyke@yahoo.com
  26. 0
    Krishnamurhi Ramasubbu ·
    Hello Tahir/Marcio
    Could you please send me a copy too.

    thank you .

    krishabinesh@yahoo.co.in
  27. 0
    Ronald Romero ·
    Tahir/ Marcio,

    Can you also send me those materials for oil and gas because i have never seen one sample project for oil and gas and very curious about it. Maybe later i will be planning it who know. Thanks in advance . here my email: ronnieksa@yahoo.com

    regards,

    ronnie
  28. 0
    Peter Nauendorf ·
    I would be interested in seeing a WBS sample with production rates as well if only to see how it compares with what I use.

    Peter N.
  29. 0
    Kristian Gargullo, PMP ·
    Mr Marcio / Tahir,

    The list was quite long but i would patiently wait for a copy also.

    tnx in advance.
  30. 0
    Kristian Gargullo, PMP ·
    kindly send it at: wolfeinstein_2004@yahoo.com

    (i hope its in a P3 format)

    cheers.
  31. 0
    Salu Thomas John ·
    Please send a copy to me too. saluthomas@hotmail.com
  32. 0
    Ruel Bacani ·
    Tahir/Marcio

    I’d like a copy too, rrbacani23@yahoo.com

    TIA
  33. 0
    Arvind Naik ·
    Hi,

    Kindly also send me a copy arvindanaik@yahoo.com

    Thanks
  34. 0
    May Maw ·
    Tahir

    Please send me a copy to aung092002@yahoo.co.uk

    Thanks.

    May
  35. 0
    Benito Nepomuceno ·
    Dear Tahir/Marcio,

    Please send me a copy to benitz19672004@yahoo.com.
    Tnx.

    Benito
  36. 0
    Jay Walsh ·
    Tahir/Marcio,

    Please send a copy to walsh.will@gmail.com. Your help is greatly appreciated.


    Jay
  37. 0
    Asif Anwar ·
    Tahir/Marcio
    I will greatly appreciate if you can send me a copy at asif_ma@yahoo.com

    Regards
    Asif
  38. 0
    Mohamad Pauzi Idris ·
    Hi Tahir/Marcio,

    Can I have one also, please e-mail to me: pauziidris1110@yahoo.com.my

    Thanks.

  39. 0
    Kamran Hazini ·
    Dear Tahir and Marcio,
    Would you please send me a copy to k.hazini@sazeh.co.ir?
    thanks in advance
  40. 0
    Mohammed Shafiq ·
    Tahir / Marcio,

    Can I too have a copy..

    gannaychoopo@hotmail.co.uk

    Thanks
  41. 0
    Asif Anwar ·
    has anyone got the copy? unfortunately i did not receive any response on my previuos ad here and my emails.

    If anyone got the copy, could you please email to my address asif_ma@yahoo.com

    thanks
  42. 0
    Mohammed Shafiq ·
    I don’t think there is a programme.....
  43. 0
    David Moses ·
    Tahir / Marcio / And All,

    May I have a copy..

    ihazar@yahoo.com

    Regards
  44. 0
    Deys Nassah ·
    Tahir/Marcio,

    Please send a copy to skhalid4.eim.ae Your help is greatly appreciated.

    Deys
  45. 0
    Deys Nassah ·
    Tahir/Marcio,

    Please also send me a copy to skhalid4@eim.ae

    Regards

    Deys
  46. 0
    Ashutosh Kumar ·
    I shall be grateful if you can provide a copy to me at kumar_ashu03@yahoo.co.in


    Thanx in advance

    Ashutosh
  47. 0
    Kamran Hazini ·
    It seems that we are waiting for nothing!! Is there anybody who got a copy?
  48. 0
    Hernando Pesca ·
    Mr. Tahir/Mr. Marcio,

    I would be glad to have a copy too (at hp_pesca@yahoo.com). We do the civil works in oil and gas projects, but what you have would be a great help.

    Thanks in advance.

    Hernan
  49. 0
    Abbas Shakourifar ·
    I would be glad also to have a copy of that sample. Shakourifar@gmail.com
  50. 0
    Izam Zakaria ·
    Yeah don’t forget me too...aizamcapri@gmail.com and aizam@rnzgroup.com

Log in or join to reply

ProjectControls.com is free to join. Members can post questions, reply, vote and follow discussions.

Existing members: your original username and password still work. Forgot password?